Learn To Make Hip Hop

...Learn to make hip hop music. become a true beatmaker today.

more-affordable

...now browsing by tag

 
 

Randall RT503

Thursday, September 2nd, 2010

Many people associate Randall with its artists. Dimebag was a long-time user of the company’s solid-state amps and co-designed the Warhead. Likewise, Kurt Cobain used a solid-state Commander to record Nirvana’s debut, Bleach.

But Randall knows a thing or two about valves, too (take Kirk Hammet’s use of his RM120KH to inflict crippling high-gain tone), and is now offering its pure valve designs at a more affordable price with the RT Series, a family of traditional valve amps aimed at valve first-timers.

There are four amps in the range: a 50-watt, two-channel head and combo, and a pair of three-channel heads available in a 100 or 50-watt format. The latter RT503, our review model, gives you the full three-channel design (clean, OD1 and OD2) with separate EQs per channel for a more manageable output level.

It comes fitted with a pair of US staple 6L6 output valves, but these can be swapped for EL34s if you’re after a more British flavour. Biasing valve amps is usually best left to the experts, but the Bias control on the back of the amp lets you replace, swap and bias the valves yourself.

Randall’s clean sound has been divisive, but the RT’s dedicated clean channel goes some way towards remedying this. Boosting the preamp all the way for pushed sounds can get fizzy; it’s better to let the 6L6s do the work by keeping the preamp gain below three-quarters and pushing the power section. The reward ranges from spiky funk with our Strat’s singlecoils, up to a slightly driven jangle with humbuckers.

The clean channel’s bright switch is subtle, but once you’ve cranked the output you’ll notice the extra bite. Tipping OD1′s gain control just above zero results in a solid ‘in between clean and dirty’ tone. Above this things get progressively heavier with almost enough gain for metal at the top.

Select OD2 and you might as well don a poodle wig, bust out the pentatonics and write an album that becomes known by its sleeve colour. This is ‘Tallica territory. Where OD1 is fairly wide and open sounding, OD2 is tighter, meatier and, to our ears, more scooped.

The sub £1,000 price bracket has become a regular stomping ground for amp builders. While this amp does an admirable job of providing a range of sounds for different genres, Randall’s heritage rightly implies a penchant for the heavier end of the spectrum, and the RT503 seems happiest when you really allow it to wail.



Read the rest here:
Randall RT503

Tell others about us:
  • Twitter
  • Digg
  • StumbleUpon
  • MySpace
  • Reddit
  • del.icio.us
  • Facebook
  • Mixx
  • Google Bookmarks

New stuff from SPL

Monday, March 22nd, 2010

SPL has just announced five new products (four hardware, one software), and I think there’s something for everyone here. Stay tuned for further details (price/availability).

By the way, if for plug-ins 2009 has been a year of reverbs, it seems in 2010 we’ll have plenty of new drum replacement tools to try. Well, given SPL’s experience with transients, I bet their DrumXchanger will be a hit (ehm…!)

Outboard

  • M/S Master: M/S management processor
  • Transpressor: The ultimate dynamic processor
  • RackPack 4: RackPack frame for four modules
  • Dual-Band De-Esser: RackPack module against sibilance

Software plug-in

  • DrumXchanger

Here’s a short description of each device…

M/S Master

  • Fully adjustable separation of L/R signals into middle/side signals
  • Frequency filter for bass and room ambience control
  • Stereo width control
  • Inserts for external processors. Switch your outboard from stereo to M/S processing – with a single button and without cabling.

Transpressor

  • Transient Designer & Twin Core Compressor
  • Both modules can be used in any order
  • Transient processing starts at the limits of compression, e. g. to emphasize dynamic structures in spite of compression.

RackPack 4

  • Mounting frame & power supply for up to four modules
  • Compact, portable and more affordable
  • Lateral handle, fitting system for a 19-inch rack included
  • New RackPack module: Dual-Band De-Esser
  • Kicks “S” with phase cancellation technique
  • Extremely sound-neutral
  • Increased effectiveness and targeted processing with high and low band
  • Auto-Threshold keeps processing level constant even at varying microphone distances
  • Male/Female mode perfectly adapts to male or female voices

DrumXchanger

  • Optimizes or replaces drum sounds in a mix
  • Replaces samples phase-accurately
  • Transient Designer technology for level-independent recognition
  • Recognizes all drum hits faithfully, including the faintest ghost notes
  • Included:
  • Two complete Transient Designer processing stages
  • High-quality 24 bit/96 kHz SPL sample library
  • Launch of the BETA version at Musikmesse (March 24)

Read the rest here:
New stuff from SPL

Tell others about us:
  • Twitter
  • Digg
  • StumbleUpon
  • MySpace
  • Reddit
  • del.icio.us
  • Facebook
  • Mixx
  • Google Bookmarks

Vox AC30C2 2 x 12 combo

Wednesday, March 17th, 2010

The Vox AC30: a bastion of British tone that defined a generation in sound. Since the UK-made reissues of the 1990s, the brand has been continually evolving its solution to affordable-yet-authentic new versions of its number one son.

A significant watershed came in 2005 when Vox switched production to China for the well-received Custom Classic series. Player feedback, however, told Vox’s designers that the CC’s myriad switches and options were largely surplus to requirements, so what better reason to revisit the design, save a bit of cash and offer an all-new, more stripped-down AC30 Custom? Intrigued? Yep, us too…

Before you read on, check it out in action on video:

The very first AC30s didn’t have the fabled Top Boost section; it was originally something you could have as an upgrade if you returned your amp to the JMI factory in Kent. Later models had it as standard of course, and it’s no surprise to see it included here alongside a ‘normal’ channel.

“It even does a good Brian May at – gasp! – a manageable volume!”

The two channels aren’t footswitchable, though each has its own inputs and volume control, feeding the master volume – unlike original AC30s – and Tone Cut pots. The Top Boost channel also has a pair of tone controls while the onboard reverb and tremolo sections, both controlled by two further pairs of controls, are applicable to both channels. It’s also possible to plug instruments into both channels at once.

The livery here is evocative of the old-school as always, with the chicken-head knobs and purple top panel working perfectly with gold piping and brown diamond grille cloth. One of the most important features for tonehounds and collectors when considering a vintage AC30 is the provision of Celestion Alnico Blue speakers. Our review model has the more affordable 25W Celestion G12M Greenbacks, though there is also a Blue-loaded version (the AC302X at £1292).

(2 pages; go to page: 2)

Related Stories



See the original post here:
Vox AC30C2 2 x 12 combo

Tell others about us:
  • Twitter
  • Digg
  • StumbleUpon
  • MySpace
  • Reddit
  • del.icio.us
  • Facebook
  • Mixx
  • Google Bookmarks

Wallander Instruments releases ‘Orchestral and Band Brass’ and ‘Woodwinds and Saxophones’ Standard Editions

Thursday, January 14th, 2010

14th January 2010: Wallander Instruments has announced the release of two new, more affordable, collections of modelled brass and woodwinds, utilizing its new Standard Edition (SE) Player. The Professional Edition (PE)…

Read the original here:
Wallander Instruments releases ‘Orchestral and Band Brass’ and ‘Woodwinds and Saxophones’ Standard Editions

Tell others about us:
  • Twitter
  • Digg
  • StumbleUpon
  • MySpace
  • Reddit
  • del.icio.us
  • Facebook
  • Mixx
  • Google Bookmarks

Celemony announces Melodyne assistant and Melodyne essential 2

Wednesday, September 23rd, 2009

23rd September 2009: Celemony Software has announced two new products: Melodyne assistant, which offers the Melodyne technology for the editing of vocals and monophonic instruments in a more affordable yet nonetheless imp…

More here:
Celemony announces Melodyne assistant and Melodyne essential 2

Tell others about us:
  • Twitter
  • Digg
  • StumbleUpon
  • MySpace
  • Reddit
  • del.icio.us
  • Facebook
  • Mixx
  • Google Bookmarks